Do you know how important an idea is if it is developed?
The creative hands of hard workers, and the ideas that continue to flow will create a masterpiece that is so graceful. These works will be very valuable if they are continuously developed. Do you see the picture below, how passionate the hardworking mothers are to work, this is one of the pictures taken from the production workers at CV. Alas Gembol. Their creative hands are very helpful. They diligently sanded the wood, to clean the media on the wood from dirt and defects in the wood itself. But with the help of machines, it can make it easier for workers to work.
Do you know how to sand properly?
First we have to know the types of wood sandpaper. Yes, there is dry wood sandpaper and wet wood sandpaper.
If we know about dry sandpaper, it is often used by carpenters which is used to smooth the surface of objects or products without liquid. If wet sandpaper is used to smooth or flatten a surface, use a liquid, namely water or sperm simultaneously. The advantage of using dry wood sandpaper is that the process is short, it can reduce the working time. In addition, it lasts a long time, is not easily damaged, and is safer for workers. The advantages of wet wood sandpaper as a result of the product can be seen immediately, there is no dust so that it does not pollute the work environment.
This also needs to be considered, do you know the dangers of spiritus?
Spiritus is a dangerous material because it is volatile, toxic, and flammable. If it comes into contact with the skin it will cause irritation. While spiritus is also flammable if in the wrong place it will burn things around. With this, it is necessary to apply a good and correct way of sanding wood:
For beginners, choose sandpaper that suits your needs, if necessary, use gloves to protect your hands from being exposed to the spirit, lay out the sandpaper and cut 4 parts. Hold the amp paper firmly, then move it against the surface. It’s important to remember if the surface is flat or flat, then use a flat foundation. maximized with coarse sandpaper, then move it to fine sandpaper. The higher the number, the finer the grit paper. always in accordance with the direction of the wood grain and not against the direction of the wood grain. To prevent a bumpy surface, use a wooden block when hand-shading. Why should use blocks, because blocks can lock the amplas. The trick is to pull the ends with a separate hyal block, which aims to remove the paper and replace it with new pieces.
If using a machine that needs attention, make sure before installing the socket, the switch must be in the off position. In the sanding machine, there is a circular button that functions so that the button can lock so that it can turn on without having to press the button.
Do you know? Sanding machine with variable speed type, we can rotate – switch switch to adjust the machine speed. The thing to note is that if the dust bag is full in the machine, we must dispose of it by removing it carefully. Remove the plug from the socket and clean the dust with a brush carefully.
Keep in mind that all work must be careful because there must be good and bad. So everyone must be careful. A brilliant idea will create a skillful hand